Filter by price
Filter by Category
Filter by Brand
Filter by Merchant
- Fender (4658)
- Guitar Center (11091)
- zZounds (11918)
Deal found on the:
website.
Get my Guitar found the latest prices on the Radial Engineering Headbone VT Amp Head Switcher for Tube Amps.
As part of the growing line of Tonebone foot pedals, Radial introduces the Headbone VT, a guitar amplifier head switcher that allows the player to transition from, for example, a Mesa Boogie Dual-Rectifier to a Marshall JCM800 while using the same cabinet. The Headbone employs a series of photocells to assure noise-free guitar-to-head switching and a series of high cycle relays that switch between the 2 heads and the speaker. A digital programmable interrupt controller receives commands from the onboard footswitch or the Slingshot remote switching system and controls the transition between equipment to ensure proper amplifier loads are always maintained. Amp head switcherEmploys a series of photocells for noise-free switchingHigh cycle relays switch between the 2 heads and the speakerDigital programmable interrupt controller receives commands from the onboard footswitch or the Slingshot remote switching systemControls the transition between equipment to ensure proper amp loads | Radial Engineering Headbone VT Amp Head Switcher for Tube Amps
Store: Guitar Center- Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering Headload Prodigy Combination Load Box and DI 8 Ohm.
"Like the larger Headload, the Prodigy employs custom-made, cement-encrusted, ceramic-coated resister coils to convert the excessive power from the amplifier to heat and is able to comfortably withstand up to 100-watts RMS. The Prodigy may be used in three different ways, depending on the need: First, it may be used as a direct box via the built-in Radial JDX Reactor. The hugely popular JDX combines a reactive load with a proprietary filter bank to emulate the tone of a 4x12 half stack. This features 100% discrete class-A circuitry for optimal tone and transformer isolation to eliminate hum and buzz caused by ground loops. Designed to replace a microphone, the JDX delivers greater consistency while eliminating concerns such as stage resonance, bleed from other instruments and problematic room acoustics which can play havoc on the tone. Second, the Prodigy may be used as a load box where you can attenuate the output from 100% down to 50% or to 25% to drive your amp harder while keeping the volume down to a comfortable level. Finally, the prodigy can be used without a speaker cabinet for completely silent recording. This is particularly useful in small venues where the speaker cabinet on stage may conflict with the sound in the room. It is also great for silent recording where you want to take advantage of ""high power"" amp distortion without upsetting the neighbors. In order to optimize the playing experience for in-ear monitors, a dual-band EQ lets you optimize bass and treble settings. Two additional 1/4"" outputs enhance connectivity: The first is direct from the amp while the second is post-EQ - post-JDX. These are used to feed additional amplifiers or effects and adjusted using the front panel-level control. A second-level control is used to adjust the built-in headphone amplifier for silent practicing. Housed in 14-gauge steel to help keep magnetic radiation at bay, the Headload Prodigy features a handy carry handle plus Radial's unique book-end design that creates a protective zone around the switches and controls. The internal I-beam construction adds tremendous rigidity, protecting the sensitive PC board from being torqued which could lead to solder joints going cold prematurely. One or two Prodigies may be rack-mounted into a single 19"" rack space using an optional rack kit and power is supplied by an external 15VDC supply with a cable clamp to prevent accidental disconnection. Available in the 8 ohm model. Load box with 100%, 50% and 25% silent attenuationLets you drive your amp hard for best toneCustom-made, cement-encrusted ceramic-coated resisters Headphone variable control Line out variable control to adjust the level going to the unbalanced 1/4 in. JDX outputs2-band EQ so you can fine tune the tone of the JDX outputLo-Z balanced mic level output used to feed the PA system, microphone, or recorderGround Lift lifts pin-1 on the XLR output to eliminate hum and buzz caused by ground loopsPre-JDX direct output sends unaffected direct signal from your amo to another stage am or effects pedal1/4 in. output to go to your amp, 1/4 in. input for your amp speaker's outputClass-A audio signal path for natural tone and optimal signal transferMil-SPEC-PCB for noise-free performance with double-sided durabilityI-Beam reinforced steel case with book-end design to protect it during transport and on stageCable clamp secures the DC adapter cable and prevents accidental power disconnectDurable powdercoat finish, rackmountable | Radial Engineering Headload Prodigy Combination Load Box and DI 8 Ohm"
Store: Guitar Center - Deal found on the:
website.
Get my Guitar found the latest prices on the Radial Engineering Highline Stereo Passive Line Is.
Amp simulators are more popular than ever, but they present a unique set of problems for guitar and bass players who want to interface them with a PA system. While amp sims can produce line-level outputs, they often have 1/4" unbalanced connectors that aren't designed for long cable runs, and they encounter hum and buzz from ground loops when connected directly to the PA.
Store: zZounds - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering JDX Direct-Drive Amp Simulator and DI Box Guitar Effects.
"The Radial JDX Direct-Drive is a unique and powerful device that emulates the sound of a guitar amplifier while doubling as a direct box. Unlike a typical direct box that merely transfers the sound of the pedals to the PA, the Direct-Drive simulates the tone and feel of a real guitar amp, producing a much more realistic sound. In other words, with the Direct-Drive on your pedalboard, you can do a gig without carrying an amp to the club. The design begins with a traditional .25 in. guitar input and passive thru-put to feed a stage amp. This is then followed by a dedicated tuner output that is buffered in order to eliminate loading on the pickup or noise from the quartz clock. The guitar signal is then passed through a series of carefully sculpted filters to create Radial’s signature JDX tone. This is modeled after the sound of a Shure SM57™ in front of a Marshall™ 4x12 cabinet. The Direct-Drive goes further with two more voicing settings: the first adds a vintage Marshall tube head character to the signal path while the second delivers a tone reminiscent of an early Fender Twin. The two amp tones can be further tailored using a presence switch for extra sparkle. The guitar signal exits the Direct-Drive via either a 1/4"" guitar-level output or via a balanced XLR to feed the PA. The direct box output is outfitted with a 180° polarity reverse switch to help phase-align monitors with the stage amp along with a ground lift switch to help eliminate hum and buzz caused by ground loops. The Direct-Drive may be powered using a standard 9V power supply or typical pedalboard power brick. As with all Radial products, the Direct-Drive is made to handle the rigors of professional touring with 14-gauge steel throughout. This not only helps prevent damage to the internal PCB, it also reduces susceptibility to noise from external magnetic fields. Guitar amp simulator for pedalboardsEliminates need to bring an amp to the gig4 x 12 half-stack and open back combo tonesEmploys Radial’s popular JDX tone shaping | Radial Engineering JDX Direct-Drive Amp Simulator and DI Box Guitar Effects"
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering JX42 V2 4 Input, 2 Output Guitar and Amp Switcher.
The Radial JX42 V2 is a four-instrument, two-amp switching device designed to streamline any stage setup to ensure professional changeovers and zero downtime should problems arise. Four instrument inputs are provided on both the front and rear panels, with large toggle switches and bright LED indicators for immediate visual feedback. Multiple instruments can be active simultaneously to prevent cutting off the performance when handing off a live guitar, and all inactive instruments feed an always-on tuner output for silent tune-ups at a moment’s notice. Dual amplifier outputs are available to switch between stage amps at will or as a redundancy in case of failure during a performance. The front panel controls can also be accessed using the optional JR-5 and JR-2 remotes, or MIDI controllers can be used to activate all features of the JX42 V2. Select between 4 guitars and 2 ampsIndividual input trims and Drag Control load correctionRemote footswitch control with optional JR-2 and JR-5 switchesTransformer isolated to eliminate ground loops | Radial Engineering JX42 V2 4 Input, 2 Output Guitar and Amp Switcher
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering JX44 V2 Guitar, Amp, & FX Signal Manager.
The Radial JX44 V2TM is a guitar & amp switching and routing system for professional concert touring, providing you with the ability to connect and manage up to four guitars and four amplifiers, a stereo effects chain and a remote pedalboard with seamless integration throughout. Optional JR-5 remote footswitches or MIDI controllers can be used to select the inputs and outputs or activate FX. A local stereo effects loop can be used to connect rackmount signal processors and assign each channel to individual amplfiers, and an SGI line driver is built-in to feed distant pedalboards with ease when used with the SGI-44 remote guitar interface. An assignable direct box output is also featured for simultaneous studio-quality recording during a live performance, while a switching 120/240V power supply allows for easy international use with world touring acts. The JX44 V2 gives you full control over even the most complex touring rigs. Switch between four inputs and route the signals to up to four amplifiers simultaneously. Connect effects locally in stereo or use a remote pedalboard with the optional SGI-44, and route FX to each amp output individually for wet-dry-wet setups. Utilize the JR-5 for remote guitar or amp switching, or connect a MIDI controller to integrate with existing setups. Finally, feed a direct output to FOH or a recording interface to capture the performance. Buffered gold-contact inputs for unbalanced instruments such as guitars and bassesReverses signal polarity at the corresponding amplifier output to help correct phase issues when using multiple amps simultaneouslyThe front panel jacks take priority over the rear panel instrument inputsLarge switches with green LED indicators turn each instrument input on/offMultiple inputs can be on simultaneouslyStandard 5-pin MIDI connector allows MIDI controllers to activate the inputs and outputs of the JX44 V2Eight dip switches con gure channel, program, and control changesCan be used in conjunction with the JR-5 remoteSelects whether the left or right EFX loop inputs feed the corresponding amplifier outputWhen ‘dry’ is selected, the EFX Loop will not feed the amp outputDisconnects the shield on the corresponding amplifier output to eliminate hum and buzz caused by ground loopsSwitch with red LED indicator cuts all outputs except for the Tuner outBuffered unbalanced output to feed a tuner pedal-this output is fed by all inactive instrument inputs, and will always be active even if the Mute switch is engagedBuffered and Jensen-transformer isolated gold-contact outputs for feeding up to four stage amplifiersBalanced XLRM output to feed a mixer or recording interfaceLift switch disconnects pin-1 to eliminate hum and buzzAssign switch selects whether the Direct Out is fed a pre or post EFX signal, or instrument input 4 exclusivelyConnections for unbalanced instruments, wired in parallel with front panel connectionsConnection for standard IEC power cable. 120V/240V operation for international useXLRM allows connection to the optional JR-5 remote for footswitch control of either the instrument inputs or the amplifier outputsTwo JR-5 remotes can be used simultaneously1/4” TS jack for connection to standard momentary footswitches such as the JR1-M to turn on/off the EFX Loop remotely1/4” TS send and receive connections for local effects pedal chainsBalanced SGI loop works with the optional SGI-44 to drive long cable runs to and from a remote pedalboard | Radial Engineering JX44 V2 Guitar, Amp, & FX Signal Manager
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering PZ-Deluxe Acoustic Preamp / Direct Box Guitar Pedal.
The Radial PZ-Deluxe is a studio-quality instrument preamp that works well with a wide variety of pickups and transducers. Apart from its studio applications, it packs a full array of features into a compact pedal that is great for live stage use. And like most studio preamps, the PZ-Deluxe begins with a low noise front end that is capable of exceptional dynamics to adapt to all instruments including acoustic guitar, upright bass, mandolin and violin no matter what type of pickup system is being used. For piezo transducers, a special PZB gain stage may be engaged that increases the input impedance to 10 meg-Ohms to eliminate squawk and explosive peaks that are common with other systems. This eliminates the need for a separate preamp - which is of particular importance for those that do not want to cut a hole into their vintage guitar. The control panel is well appointed with input gain, 3-band semi-parametric EQ with variable mid-frequency, three position low frequency resonance filter and 180-degree polarity reverse switches to eliminate acoustic hot spots that cause runaway resonant feedback. A guitar level output delivers the sound to the artist's stage amp while the built-in Radial direct box feeds the PA system. This balanced low impedance output enables the PZ-Deluxe to drive long cable runs of over 100 meters (300 feet) without noise. A separate tuner output enables quiet on-stage adjustments by depressing the mute switch. And for solos, a variable power booster with set & forget level control lets you punch through the mix when needed. The Radial PZ-Deluxe is compact for easy transportation, made tough to handle the road, plug & play easy to use and delivers exceptional studio quality audio. Acoustic guitarThe PZ-Deluxe 15V supply delivers more headroom than typical 9V devices for greater dynamics, less distortion and more natural tone. This makes the PZ-Deluxe the perfect front end for acoustic guitars with built-in active systems, electric violin and magnetic pickups. Direct piezo hook-upThe PZ-deluxe eliminates the need for a preamp. Simply activate the PZB gain stage and the PZ-Deluxe automatically elevates the input impedance to 10 meg Ohms and connect the guitar directly to the studio quality preamp for smooth, natural performance. Upright bassThe studio quality preamp delivers exceptional performance no matter what instrument you plug in. This makes the PZ-Deluxe a great choice for acoustic bass, viola, mandolin, banjo or just about any acoustic instrument. Bypass your external preamp by turning on the PZB for optimum performance. Combination instrument preamp and direct boxExceptionally quiet audio performanceWorks on all types of pickups and transducersFootswitches for muting and power booster | Radial Engineering PZ-Deluxe Acoustic Preamp / Direct Box Guitar Pedal
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering PZ-Pro 2-Channel Acoustic Instrumental Preamp.
The PZ-Pro is a two channel instrument preamp, switcher, and performance control station designed for stage musicians who are serious about their tone and like being in the driver's seat. Dual input channels allow you to switch between two sources or blend them together, with full control over the sound of each instrument, and the ability to bring effects pedals and a signal booster into the mix with a single footswitch. Each channel on the PZ-Pro has its own semi-parametric equalizer section and input level, along with individual filter controls to reduce feedback on stage. Channel-B also features a microphone input to allow any dynamic or condenser microphone to be used, including clip-on instrument mics or even vocal microphones. An FX Loop with a wet/dryknob provides the ability to blend in as much or as little pedal effects as desired, with a footswitch to bring them in and out of the signal chain at a moment's notice. Finally, once your tone is completely dialed-in, balanced XLR direct outs feed the PA system or a recording interface, with both Pre-EQ and Post-EQ outputs available. Technical Specifcations: * Two independent input channels with separate EQsMicrophone input on channel-B with 48V phantom powerEFX Loop and clean Boost with footswitch controlBalanced pre and post-EQ outputs to feed PA/MonitorsSwitch/Combine instruments with a clip-on or vocal micPZ Boost circuit to optimize for use with piezo transducersSelectable High-Pass/Notch filter to reduce on-stage feedbackReconfigure the EFX/Boost footswitch to suit your setup | Radial Engineering PZ-Pro 2-Channel Acoustic Instrumental Preamp
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering R15DC-UNIVERSAL 15VDC Switching Power Supply.
The Radial R15DC-UNIVERSAL switching power supply comes with multiple adaptors to connect to outlets in the USA, Europe, the United Kingdom, and Australia. This unit supplies 15V DC at 400mA with a center-pin positive barrel connection and can be used with any power grid where the mains voltage range is 100-240V, 50-60Hz. This switching power supply is designed for use with all 15V DC Radial products, except the legacy Tonebone tube-based guitar pedals and the JD7. | Radial Engineering R15DC-UNIVERSAL 15VDC Switching Power Supply
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering Shotgun 4-Channel Amp Driver.
"The Shotgun is a compact guitar-level signal buffer designed to drive up to four amplifiers simultaneously and fit nicely on any pedalboard. It features two inputs with a switching jack on input 2 that—when connected—changes the architecture from a 1x4 mono distribution system to a 2x2 stereo setup. The Shotgun is equipped with CLC—Radial's unique Consistent Load Compensation circuit—that retains a stable input impedance to ensure the character of the signal remains unchanged, no matter if you use one or two sources. Inside, a carefully designed low noise buffer circuit with a full-surface ground plane delivers your tone farther—up to 50' (15 meters) without noise. This is augmented with isolation transformers on outputs 2, 3 and 4 to help eliminate the nasty buzz and hum caused by ground loops when multiple amps are connected together. And like all Radial products, the Shotgun is made tough to handle the rigors of professional touring. Powering is done using standard 9V supply or multi-pedal power brick. When used in the 1x4 mono-mode, the Shotgun will effortlessly drive multiple amplifiers, direct box outputs and modeling amplifiers at the same time. In 2x2 stereo-mode, you can connect the output from your stereo chorus to the Shotgun and drive two or four amps in stereo, in phase, without noise. Inputs: Two 1/4""Outputs: Four 1/4""Configurable for 1x4 mono or 2x2 stereoIsolated outputs eliminate ground loopsBuffered outputs drive extra-long cablesCLC (Consistent Load Compensation circuit)Made in Canada | Radial Engineering Shotgun 4-Channel Amp Driver"
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering Switchbone V2 ABY/C Amp Selector and Booster Pedal.
The Switchbone V2 is an ABY/C guitar amp switcher that lets you switch and combine up to three guitar amplifiers without introducing distortion, switching noise or hum into the signal path. Most importantly, the Switchbone V2 will retain the natural tone and feel of your instrument so your playing style shines through. Unlike other switchers that employ integrated circuits to buffer the signal, the Switchbone features Radial's award winning Class-A audio circuit with 100% discrete components throughout. Class-A circuits are preferred by audiophiles and guitarists due to the purity of the signal path and warm sounding even-order harmonics that they produce. This is augmented with Drag™ control load correction that lets you dial-in the tone and feel as if connected directly to your amp. This clever combination lowers the impedance to allow runs of up to 15 meters (50') without susceptibility to noise using standard coaxial cables. To eliminate troublesome switching pops caused by mechanical footswitches and relays, the Switchbone employs high performance opto-couplers that essentially use light to emit and receive the command. These devices ramp-up and ramp-down the signal for smooth, controlled switching even with high gain amps. To eliminate the hum and buzz that is common with other switchers, the Switchbone V2 is equipped with transformer isolated outputs to eliminate nasty ground loops and is augmented with ground lift switches to further aid in noise elimination. Polarity reverse switches on outputs B and C ensure all amps are aligned to absolute phase. The Switchbone V2 may be used as a standard ABY switcher with both A and B outputs used separately or together. When two amps are on, ToggleMode™ LED indicators flash to let you know which amp was selected last so that you can either turn that one off or change the selection on the fly. When three amps are needed, the tuner output can be repurposed along with the third footswitch for clean rhythm and lead setups. In play, the Switchbone V2 elevates your setup with a variable Baseline™ buffer control that lets you juice up the front end of your amp for extra punch. A built-in power booster at the output delivers up to +18db of ultra-clean boost with the option to add mid-boost for extra sustain when playing lead. The Boost footswitch may also be reassigned to a tuner output for quiet on stage adjustments. To add even more control to your performance, the Slingshot™ remote control output can be used to turn on effects, change speakers when combined with the Tonebone™ Cabbone™ or even reroute effects using the Twinline™. 100% discrete Class-A signal path for exceptional audioDrag™ control load correction for natural toneOpto-coupler for noiseless switchingTransformer isolated to eliminate buzz and hum | Radial Engineering Switchbone V2 ABY/C Amp Selector and Booster Pedal
Store: Guitar Center - Get my Guitar found the latest prices on the Radial Engineering Switchbone V2 ABY/C Switcher.
The Switchbone features Radial's award winning Class-A audio circuit with 100% discrete components throughout. Class-A circuits are preferred by audiophiles and guitarists due to the purity of the signal path and warm sounding even-order harmonics that they produce. This is augmented with Drag control load correction that lets you 'dial-in' the tone and feel as if connected directly to your amp.
Store: zZounds - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering Tonebone PZ-Pre Acoustic Direct Box Preamp.
"The Tonebone PZ-Pre Acoustic DI Box Preamp is equipped with piezo acoustic input signal boosters to allow both add-on instrument pickups and built-in, integral active preamps to be combined for a more natural rendering. It is compact yet fullfeatured, designed for both studio and live performance. The Tonebone PZ-Pre instrument preamp begins with two inputs for two instruments, which can be toggled using the toggle footswitch. If you want to use two pickups on a single guitar, a unique Mix function is provided that converts the two channels from ""either-or"" to both. There are separate level controls for each input. The tone shaping on the PZ-Pre preamplifier is simple yet extremely musical. It features powerful bass and high controls with a semi-parametric mid. This is supported with a feedback eliminating notch filter with variable frequency sweep control and choice of normal and extra deep notch filtering. To help eliminate troublesome resonance, a dual slope low cut (high pass filter) is also provided. An internal polarity reverse can also be engaged to help eliminate run-away feedback. To augment on-stage performance, the PZ-Pre Direct Box Preamp is equipped with a combination power booster and effects loop bus. This allows you to introduce an effect such as a chorus, or boost the signal for soloing with a simple foot stomp. A separate tuner out has also been provided along with a mute footswitch for on-the-fly tuning. To facilitate all kinds of monitoring, the Radial PZ-Pre offers the most comprehensive output array ever: A standard instrument amp output sends the instrument signal to your personal amplifier. A pre-EQ balanced lo-Z balanced output is used to route the flat, pre-equalized signal the signal to the front of house mix position, while a second XLR out is post-EQ for onstage monitoring and in-ear systems so that the musician can get the sound he wants. XLR outputs are equipped with polarity reverse and ground lift. Like all Radial products, the PZ-Pre features heavy-duty 14-gauge construction and is supported with a 3-year transferable warranty. Comes equipped with an external 15VDC power supply. Piezo acoustic input signal boostersDesigned for studio and live performanceUnique Mix function1 -gauge construction3-year transferable warranty | Radial Engineering Tonebone PZ-Pre Acoustic Direct Box Preamp"
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering Tonebone Twin-City Active ABY Switcher.
The Bones Twin-City footswitch from Radial Engineering is an active ABY switcher and buffer that enables you to connect any two amps and drive them simultaneously without noise, loss of gain, and without degrading your natural guitar tone. This is accomplished with Radial's highly acclaimed buffering technology and the same Drag Control load correction circuitry as used in the award-winning Radial JD7 Injector. The 'set and' forget Drag Control lets you compensate for cable signal loss and introduce the perfect amount of loading to replicate the way your guitar and amp interact. To eliminate hum and buzz from ground loops, the Twin-City is equipped with an isolation transformer on output B. This is augmented with a ground lift switch and 180 polarity reverse switch that ensures both amplifiers play in phase while noise is reduced to an absolute minimum even when using older vintage amps that are generally more prone to noise. As a buffer, the Twin-City footswitch lowers the impedance and susceptibility to noise, making it the ideal signal driver for large stages when using long cable runs. Like all Radial products, the Bones are constructed from heavy 14 gauge steel for greater durability and added 'stay put' when kicked around on a busy stage. For even greater durability, the Twin-City footswitch employs Radial's own EIS-Electronic Impulse Switching-for outstanding performance without the challenges of mechanical switches. Bright, easy to see LEDs deliver on-stage switching cues so you know exactly where you are at all times. As most players employ pedal boards, the Radial Twin-City features standard 'Boss style' 9V powering that will adapt to most multi-pedal power supplies. The ultra compact design with top mounted output and DC connections allow effect pedals to be placed close together for those wishing maximum pedal board density. Buffered ABY with Drag load correctionIsolated output eliminates hum and buzz180 polarity sets both amps in phaseCompact to fit on any pedal boardStandard 9 volt power supply operation | Radial Engineering Tonebone Twin-City Active ABY Switcher
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering Voco-Loco Vocal Preamp and Effect Switcher.
"The Voco-Loco is a foot-controlled effects loop that enables the lead vocalist, sax or trumpet player to incorporate guitar effects pedals into the signal path, just like an electric guitarist adds effects for soloing. The design begins with a state-of-the-art mic preamp that is designed to accept both a standard dynamic microphone or a condenser by activating the built-in phantom power supply. A great sounding two band EQ with low and high frequency shelving makes it easy to add warmth and shimmer. The signal is then sent to the guitar pedals via a transformer isolated hi-Z effects loop circuit that is equipped with individual send & receive controls to optimize signal-to-noise and reduce distortion. A tone control on the return path lets you smooth the sound of pedals that may be overly bright and the blend control lets you mix the original 'dry' signal with the 'wet' effect to set the perfect mix. Simply plug your mic into the Voco-Loco via the XLR input, connect your effects pedals using standard ¼"" guitar cables, and then send the output from the Voco-Loco to the input on your mixer. Before the song begins, choose which effects you want on and - when you are ready - activate the loop using the right hand footswitch. A second footswitch serves double-duty as either a mute switch to turn off the mic between sets or as a 100% wet effects loop for special situations where you may not want any of the clean signal to pass through. With the Voco-Loco in your signal chain, you can add delay or reverb, maybe a touch of distortion or even a special effect like a wah-wah to enhance your solo performance. The options are only limited by your imagination and desire to stand out from the crowd! Add guitar effects pedals to vocals or instrumentsCreate exciting and unique effects as you performTurn on multiple effects using one footswitchWorks with either dynamic or condenser microphones | Radial Engineering Voco-Loco Vocal Preamp and Effect Switcher"
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Highline Passive Mono Line Isolator.
Amp simulators are more popular than ever, but they present a unique set of problems for guitar and bass players who want to interface them with a PA system. While amp sims can produce line-level outputs, they often have 1/4" unbalanced connectors that aren't designed for long cable runs, and they encounter hum and buzz from ground loops when connected directly to the PA.
Store: zZounds - Deal found on the: website.
Get my Guitar found the latest prices on the Radial IceCube IC-1 Passive Line Level Isolator.
The Radial IceCube IC-1 is a balanced line level isolator designed to quickly eliminate hum and buzz problems in an audio system by simply inserting it into the signal path. Measuring just over 4" x 1" (10 x 4cm), the compact design begins with two super-duty glass-filled nylon XLRs at each end with heavy duty nickel-silver contacts that will not tarnish over time.
Store: zZounds - Get my Guitar found the latest prices on the Radial JX42 V2 Four Instrument Dual Amp Switch.
Incredible audio quality and remote connectivity, the JX42 V2 offers professional guitar and amp switching for any touring act. The Radial JX42 V2 is a four-instrument, two-amp switching device designed to streamline any stage setup to ensure professional changeovers and zero downtime should problems arise.
Store: zZounds 
Get my Guitar found the latest prices on the Radial JX44 V2 Guitar And Amp Switching System.
The Radial JX44 V2 is a guitar & amp switching and routing system for professional concert touring, providing you with the ability to connect and manage up to four guitars & four amplifiers, a stereo effects chain and a remote pedalboard with seamless integration throughout.
Store: zZounds- Get my Guitar found the latest prices on the Radial PSU15VDC 15V AC Adaptor For Radial Products.
This Radial replacement 15V Switching power supply is designed for use with 15V Radial products and comes with multiple adaptors to connect to outlets in the USA, Europe, the United Kingdom, and Australia. This unit supplies 15V at 400mA with a center-pin positive barrel connector and can be used with any power grid where the mains voltage range is 100-240V, 50-60Hz.
Store: zZounds - Get my Guitar found the latest prices on the Radial Pz-Pro Dual Channel Acoustic Preamp.
The Radial PZ-Pro is designed for instrumentalists and performers who take a no-compromise approach when it comes to tone, both on stage and in the recording studio. Dual input channels allow you to switch between or blend together two sources, with full control over the sound of each input.
Store: zZounds - Get my Guitar found the latest prices on the Radial PZDI Active DI for Acoustic Instruments.
The Radial PZ-DI has a variable load selector switch that allows you to set the input impedance of the direct box, so you can optimize the performance with your instrument's pickups.
Store: zZounds 
- Get my Guitar found the latest prices on the Radial Tonebone Headbone VT Amp Head Switcher.
With the Headbone in your rig, you can access your choice of amplifier with a single footswitch, giving you the ability to easily select between one amplifier for rhythm and another one for solos. To eliminate long cables running across the stage, you can switch the Headbone remotely with a Slingshot input that allows you to connect any standard footswitch or MIDI controlled contact closure, further streamlining your setup on stage.
Store: zZounds - Get my Guitar found the latest prices on the Radial ToneBone PZ Pre Acoustic Instrument Preamp.
The Radial PZ-Pre is a powerful acoustic instrument preamplifier. The magic lies in the combination of high performance 100% discrete class-A PZB piezo boosters, an ultra-quiet preamp circuit that will adapt to any pickup system and a host of connectivity options that will put you in total control.
Store: zZounds - Get my Guitar found the latest prices on the Radial Twin City Bones A-B-Y Selector Box.
The Twin-City is an active ABY switcher and buffer that enables you to connect any two amps and drive them simultaneously without noise, loss of gain and without degrading your natural guitar tone. This is accomplished with Radial's highly acclaimed buffering technology and the same Drag Control (TM) load correction circuitry as used in the award-winning Radial JD7 Injector. The 'set and forget' Drag Control lets you compensate for cable signal loss and introduce the perfect amount of loading to replicate the way your guitar and amp interact.
Store: zZounds - Deal found on the: website.
Get my Guitar found the latest prices on the Randall RD412-V30 Diavlo 4x12 Guitar Cab Black.
"The Randall RD412-V30 Diavlo speaker cabinet features four of the legendary Celestion Vintage 30 12"" speakers, together rated at 260W, made to pair with the Diavlo series metal-geared heads and combos. While the ruggedly constructed cabinet box is square, the speakers are mounted on an angled baffle to help project your sound and highlight more high frequencies. Power: 260WSpeaker: 4x12"" Celestion Vintage 30Impedance: 8 ohm parallel mono/16 ohm stereoHeavy-duty metal speaker grilleCasters includedDimensions: 30"" x 14.1"" x 30""Weight: 95 lb. | Randall RD412-V30 Diavlo 4x12 Guitar Cab Black"
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Randall RD45H Diavlo 45W Tube Guitar Head Black.
"The Randall RD45H 45W amp head provides the spine-crushing, tube-driven tone, but in a size you can use for practice, the studio or the stage. It features two footswitchable channels (Clean and Overdrive) with a volume boost, and shared four-band EQ and master volume. Each channel has independent gain controls, and the Overdrive channel has an independent Volume control. Around the back of the ruggedly constructed head are dual speaker outputs, speaker-emulated XLR output for direct recording or feeding directly to a house PA, an FX loop and the tone complement of two 6L6 power tubes and four 12AX7 preamp tubes. Power: 45W tubeTwo footswitchable channels (Clean and Overdrive), plus boostFootswitch includedSpeaker-emulated XLR outputFX loopDimensions: 19.7"" x 8.6"" x 10""Weight: 30.8 lbs. | Randall RD45H Diavlo 45W Tube Guitar Head Black"
Store: Guitar Center Randall RX412 Cabinet Black
$679.99Deal found on the: website.
Get my Guitar found the latest prices on the Randall RX412 Cabinet Black.
"Randall's RX412 cabinet delivers huge sound that rivals the tone and power of much larger, more expensive boxes. Much of its power comes from the 4 - 12"" Randall Jaguar speakers, but throw in the RX tone circuits and it delivers plenty of tight lows and enough top end sizzle to satisfy any metal monster. 200W cabinet4 - 12"" Randall Jaguar speakersBlack cloth grillePlywood construction8 ohm mono input | Randall RX412 Cabinet Black"
Store: Guitar Center- Deal found on the: website.
Get my Guitar found the latest prices on the Randall Thrasher 120W 4-Mode All-Tube Amplifier Head.
"Randall's Thrasher is a 2-channel, four mode, 120W all-tube head and features Active/Passive inputs, High and Low Frequency Gain controls, full EQ for both channels, Presence/Density power amp voicing, Push/Pull bias controls, and Series/Parallel Loop. To protect it during transport, the Thrasher has been outfitted with heavy-duty metal front/rear grilles, corners, and edging while dual top handles make it easier to lift. A 2-button LED footswitch is included. Wattage/Power: 120 wattsChannels: 2+ boostSpeaker: n/aImpedance: 16, 8, 4? MinimumFX/GATE/REVERB: Tube Series/Parallel LoopFootswitch: Two channels and boost mode (RF2-LED)Dimensions (LxWxH): 29"" (738mm) x 10.4"" (265mm) x 10.5"" (266mm)Weight: 60 lb. (27kg) | Randall Thrasher 120W 4-Mode All-Tube Amplifier Head"
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Randall Thrasher 50W Tube Guitar Amp Head.
Engineered by world renowned amp guru, Mike Fortin, this amplifier is the result of countless hours of listening tweaking and perfecting the tight and relentless attack that the circuit delivers. The design is intended to offer a more focused approach to tube amp performance than previously available in the market. Drop tuning, 6-, 7- , 8- and higher stringed instruments will translate with pristine clarity while still maintaining over the top gain and playability regardless of the setting. 2 channel4 model50-watt tube (4-12AX7/2-6L6) head with High & Low Frequency Gain controlsFull EQ on Channel 1Tone control for clean channelGlobal tube boostPresence/Depth power amp voicing Class A Discrete instrument level loopHeavy-duty metal front rear grilles, cornersFootswitch included | Randall Thrasher 50W Tube Guitar Amp Head
Store: Guitar Center
website. 
website. 
Welcome to the Get My Guitar Shop: Your Ultimate Guitar & Gear Search Engine!
Hey there, gear hunters and tone seekers! 🤘 You’ve just stepped into the Get My Guitar Shop—the ultimate search engine for guitarists. We’re not your average music store. Instead, we do the heavy lifting by scouring the web to bring you the best guitars, gear, and deals—all in one convenient place!
Think of us as your personal guitar shopper, delivering top deals and gear from the biggest and most trusted online retailers. No more bouncing between tabs or hunting for sales—we’ve got it all here for you.
🎸 What You’ll Find in the Get My Guitar Shop:
- Guitars for Every Style & Budget: From legendary classics to budget-friendly gems, we collect the best online deals on electric, acoustic, and bass guitars.
- Amplifiers & Pedals: Whether you need a bedroom practice amp or gig-ready power, or you’re hunting for that perfect pedal to shape your sound—we’ve got you covered.
- Accessories Made Easy: Strings, straps, picks, and more—all from the most reliable brands at the best prices.
- Latest Deals & Sales: We track sales and promotions from leading retailers, so you never miss out on a great bargain.
⚡ Why Guitarists Love Shopping with Us:
- All-in-One Convenience: Skip the search. We pull the best guitars and gear from top sites and put them in one place.
- Trusted Retailers: We partner with major online stores like Guitar Center, Sweetwater, Reverb, and more to ensure you shop securely.
- Save Time & Money: Compare prices and score deals without opening a dozen tabs.
- Affiliate Supported: Clicking our links helps keep our site running—at no extra cost to you!
💥 Need Help Finding the Perfect Gear?
Looking for the best Telecaster deal? Need to compare amp prices? We’re here to help you discover gear that fits your sound and budget. Just search, compare, and play.
Start your gear journey now and let us help you find your next favorite guitar or piece of gear!
👉 Start Searching for Deals and crank up the volume on your guitar journey! 🎶
Filter by price
Filter by Category
Filter by Brand
Filter by Merchant
- Fender (4658)
- Guitar Center (11091)
- zZounds (11918)
- Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering Headbone VT Amp Head Switcher for Tube Amps.
As part of the growing line of Tonebone foot pedals, Radial introduces the Headbone VT, a guitar amplifier head switcher that allows the player to transition from, for example, a Mesa Boogie Dual-Rectifier to a Marshall JCM800 while using the same cabinet. The Headbone employs a series of photocells to assure noise-free guitar-to-head switching and a series of high cycle relays that switch between the 2 heads and the speaker. A digital programmable interrupt controller receives commands from the onboard footswitch or the Slingshot remote switching system and controls the transition between equipment to ensure proper amplifier loads are always maintained. Amp head switcherEmploys a series of photocells for noise-free switchingHigh cycle relays switch between the 2 heads and the speakerDigital programmable interrupt controller receives commands from the onboard footswitch or the Slingshot remote switching systemControls the transition between equipment to ensure proper amp loads | Radial Engineering Headbone VT Amp Head Switcher for Tube Amps
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering Headload Prodigy Combination Load Box and DI 8 Ohm.
"Like the larger Headload, the Prodigy employs custom-made, cement-encrusted, ceramic-coated resister coils to convert the excessive power from the amplifier to heat and is able to comfortably withstand up to 100-watts RMS. The Prodigy may be used in three different ways, depending on the need: First, it may be used as a direct box via the built-in Radial JDX Reactor. The hugely popular JDX combines a reactive load with a proprietary filter bank to emulate the tone of a 4x12 half stack. This features 100% discrete class-A circuitry for optimal tone and transformer isolation to eliminate hum and buzz caused by ground loops. Designed to replace a microphone, the JDX delivers greater consistency while eliminating concerns such as stage resonance, bleed from other instruments and problematic room acoustics which can play havoc on the tone. Second, the Prodigy may be used as a load box where you can attenuate the output from 100% down to 50% or to 25% to drive your amp harder while keeping the volume down to a comfortable level. Finally, the prodigy can be used without a speaker cabinet for completely silent recording. This is particularly useful in small venues where the speaker cabinet on stage may conflict with the sound in the room. It is also great for silent recording where you want to take advantage of ""high power"" amp distortion without upsetting the neighbors. In order to optimize the playing experience for in-ear monitors, a dual-band EQ lets you optimize bass and treble settings. Two additional 1/4"" outputs enhance connectivity: The first is direct from the amp while the second is post-EQ - post-JDX. These are used to feed additional amplifiers or effects and adjusted using the front panel-level control. A second-level control is used to adjust the built-in headphone amplifier for silent practicing. Housed in 14-gauge steel to help keep magnetic radiation at bay, the Headload Prodigy features a handy carry handle plus Radial's unique book-end design that creates a protective zone around the switches and controls. The internal I-beam construction adds tremendous rigidity, protecting the sensitive PC board from being torqued which could lead to solder joints going cold prematurely. One or two Prodigies may be rack-mounted into a single 19"" rack space using an optional rack kit and power is supplied by an external 15VDC supply with a cable clamp to prevent accidental disconnection. Available in the 8 ohm model. Load box with 100%, 50% and 25% silent attenuationLets you drive your amp hard for best toneCustom-made, cement-encrusted ceramic-coated resisters Headphone variable control Line out variable control to adjust the level going to the unbalanced 1/4 in. JDX outputs2-band EQ so you can fine tune the tone of the JDX outputLo-Z balanced mic level output used to feed the PA system, microphone, or recorderGround Lift lifts pin-1 on the XLR output to eliminate hum and buzz caused by ground loopsPre-JDX direct output sends unaffected direct signal from your amo to another stage am or effects pedal1/4 in. output to go to your amp, 1/4 in. input for your amp speaker's outputClass-A audio signal path for natural tone and optimal signal transferMil-SPEC-PCB for noise-free performance with double-sided durabilityI-Beam reinforced steel case with book-end design to protect it during transport and on stageCable clamp secures the DC adapter cable and prevents accidental power disconnectDurable powdercoat finish, rackmountable | Radial Engineering Headload Prodigy Combination Load Box and DI 8 Ohm"
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering Highline Stereo Passive Line Is.
Amp simulators are more popular than ever, but they present a unique set of problems for guitar and bass players who want to interface them with a PA system. While amp sims can produce line-level outputs, they often have 1/4" unbalanced connectors that aren't designed for long cable runs, and they encounter hum and buzz from ground loops when connected directly to the PA.
Store: zZounds - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering JDX Direct-Drive Amp Simulator and DI Box Guitar Effects.
"The Radial JDX Direct-Drive is a unique and powerful device that emulates the sound of a guitar amplifier while doubling as a direct box. Unlike a typical direct box that merely transfers the sound of the pedals to the PA, the Direct-Drive simulates the tone and feel of a real guitar amp, producing a much more realistic sound. In other words, with the Direct-Drive on your pedalboard, you can do a gig without carrying an amp to the club. The design begins with a traditional .25 in. guitar input and passive thru-put to feed a stage amp. This is then followed by a dedicated tuner output that is buffered in order to eliminate loading on the pickup or noise from the quartz clock. The guitar signal is then passed through a series of carefully sculpted filters to create Radial’s signature JDX tone. This is modeled after the sound of a Shure SM57™ in front of a Marshall™ 4x12 cabinet. The Direct-Drive goes further with two more voicing settings: the first adds a vintage Marshall tube head character to the signal path while the second delivers a tone reminiscent of an early Fender Twin. The two amp tones can be further tailored using a presence switch for extra sparkle. The guitar signal exits the Direct-Drive via either a 1/4"" guitar-level output or via a balanced XLR to feed the PA. The direct box output is outfitted with a 180° polarity reverse switch to help phase-align monitors with the stage amp along with a ground lift switch to help eliminate hum and buzz caused by ground loops. The Direct-Drive may be powered using a standard 9V power supply or typical pedalboard power brick. As with all Radial products, the Direct-Drive is made to handle the rigors of professional touring with 14-gauge steel throughout. This not only helps prevent damage to the internal PCB, it also reduces susceptibility to noise from external magnetic fields. Guitar amp simulator for pedalboardsEliminates need to bring an amp to the gig4 x 12 half-stack and open back combo tonesEmploys Radial’s popular JDX tone shaping | Radial Engineering JDX Direct-Drive Amp Simulator and DI Box Guitar Effects"
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering JX42 V2 4 Input, 2 Output Guitar and Amp Switcher.
The Radial JX42 V2 is a four-instrument, two-amp switching device designed to streamline any stage setup to ensure professional changeovers and zero downtime should problems arise. Four instrument inputs are provided on both the front and rear panels, with large toggle switches and bright LED indicators for immediate visual feedback. Multiple instruments can be active simultaneously to prevent cutting off the performance when handing off a live guitar, and all inactive instruments feed an always-on tuner output for silent tune-ups at a moment’s notice. Dual amplifier outputs are available to switch between stage amps at will or as a redundancy in case of failure during a performance. The front panel controls can also be accessed using the optional JR-5 and JR-2 remotes, or MIDI controllers can be used to activate all features of the JX42 V2. Select between 4 guitars and 2 ampsIndividual input trims and Drag Control load correctionRemote footswitch control with optional JR-2 and JR-5 switchesTransformer isolated to eliminate ground loops | Radial Engineering JX42 V2 4 Input, 2 Output Guitar and Amp Switcher
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering JX44 V2 Guitar, Amp, & FX Signal Manager.
The Radial JX44 V2TM is a guitar & amp switching and routing system for professional concert touring, providing you with the ability to connect and manage up to four guitars and four amplifiers, a stereo effects chain and a remote pedalboard with seamless integration throughout. Optional JR-5 remote footswitches or MIDI controllers can be used to select the inputs and outputs or activate FX. A local stereo effects loop can be used to connect rackmount signal processors and assign each channel to individual amplfiers, and an SGI line driver is built-in to feed distant pedalboards with ease when used with the SGI-44 remote guitar interface. An assignable direct box output is also featured for simultaneous studio-quality recording during a live performance, while a switching 120/240V power supply allows for easy international use with world touring acts. The JX44 V2 gives you full control over even the most complex touring rigs. Switch between four inputs and route the signals to up to four amplifiers simultaneously. Connect effects locally in stereo or use a remote pedalboard with the optional SGI-44, and route FX to each amp output individually for wet-dry-wet setups. Utilize the JR-5 for remote guitar or amp switching, or connect a MIDI controller to integrate with existing setups. Finally, feed a direct output to FOH or a recording interface to capture the performance. Buffered gold-contact inputs for unbalanced instruments such as guitars and bassesReverses signal polarity at the corresponding amplifier output to help correct phase issues when using multiple amps simultaneouslyThe front panel jacks take priority over the rear panel instrument inputsLarge switches with green LED indicators turn each instrument input on/offMultiple inputs can be on simultaneouslyStandard 5-pin MIDI connector allows MIDI controllers to activate the inputs and outputs of the JX44 V2Eight dip switches con gure channel, program, and control changesCan be used in conjunction with the JR-5 remoteSelects whether the left or right EFX loop inputs feed the corresponding amplifier outputWhen ‘dry’ is selected, the EFX Loop will not feed the amp outputDisconnects the shield on the corresponding amplifier output to eliminate hum and buzz caused by ground loopsSwitch with red LED indicator cuts all outputs except for the Tuner outBuffered unbalanced output to feed a tuner pedal-this output is fed by all inactive instrument inputs, and will always be active even if the Mute switch is engagedBuffered and Jensen-transformer isolated gold-contact outputs for feeding up to four stage amplifiersBalanced XLRM output to feed a mixer or recording interfaceLift switch disconnects pin-1 to eliminate hum and buzzAssign switch selects whether the Direct Out is fed a pre or post EFX signal, or instrument input 4 exclusivelyConnections for unbalanced instruments, wired in parallel with front panel connectionsConnection for standard IEC power cable. 120V/240V operation for international useXLRM allows connection to the optional JR-5 remote for footswitch control of either the instrument inputs or the amplifier outputsTwo JR-5 remotes can be used simultaneously1/4” TS jack for connection to standard momentary footswitches such as the JR1-M to turn on/off the EFX Loop remotely1/4” TS send and receive connections for local effects pedal chainsBalanced SGI loop works with the optional SGI-44 to drive long cable runs to and from a remote pedalboard | Radial Engineering JX44 V2 Guitar, Amp, & FX Signal Manager
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering PZ-Deluxe Acoustic Preamp / Direct Box Guitar Pedal.
The Radial PZ-Deluxe is a studio-quality instrument preamp that works well with a wide variety of pickups and transducers. Apart from its studio applications, it packs a full array of features into a compact pedal that is great for live stage use. And like most studio preamps, the PZ-Deluxe begins with a low noise front end that is capable of exceptional dynamics to adapt to all instruments including acoustic guitar, upright bass, mandolin and violin no matter what type of pickup system is being used. For piezo transducers, a special PZB gain stage may be engaged that increases the input impedance to 10 meg-Ohms to eliminate squawk and explosive peaks that are common with other systems. This eliminates the need for a separate preamp - which is of particular importance for those that do not want to cut a hole into their vintage guitar. The control panel is well appointed with input gain, 3-band semi-parametric EQ with variable mid-frequency, three position low frequency resonance filter and 180-degree polarity reverse switches to eliminate acoustic hot spots that cause runaway resonant feedback. A guitar level output delivers the sound to the artist's stage amp while the built-in Radial direct box feeds the PA system. This balanced low impedance output enables the PZ-Deluxe to drive long cable runs of over 100 meters (300 feet) without noise. A separate tuner output enables quiet on-stage adjustments by depressing the mute switch. And for solos, a variable power booster with set & forget level control lets you punch through the mix when needed. The Radial PZ-Deluxe is compact for easy transportation, made tough to handle the road, plug & play easy to use and delivers exceptional studio quality audio. Acoustic guitarThe PZ-Deluxe 15V supply delivers more headroom than typical 9V devices for greater dynamics, less distortion and more natural tone. This makes the PZ-Deluxe the perfect front end for acoustic guitars with built-in active systems, electric violin and magnetic pickups. Direct piezo hook-upThe PZ-deluxe eliminates the need for a preamp. Simply activate the PZB gain stage and the PZ-Deluxe automatically elevates the input impedance to 10 meg Ohms and connect the guitar directly to the studio quality preamp for smooth, natural performance. Upright bassThe studio quality preamp delivers exceptional performance no matter what instrument you plug in. This makes the PZ-Deluxe a great choice for acoustic bass, viola, mandolin, banjo or just about any acoustic instrument. Bypass your external preamp by turning on the PZB for optimum performance. Combination instrument preamp and direct boxExceptionally quiet audio performanceWorks on all types of pickups and transducersFootswitches for muting and power booster | Radial Engineering PZ-Deluxe Acoustic Preamp / Direct Box Guitar Pedal
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering PZ-Pro 2-Channel Acoustic Instrumental Preamp.
The PZ-Pro is a two channel instrument preamp, switcher, and performance control station designed for stage musicians who are serious about their tone and like being in the driver's seat. Dual input channels allow you to switch between two sources or blend them together, with full control over the sound of each instrument, and the ability to bring effects pedals and a signal booster into the mix with a single footswitch. Each channel on the PZ-Pro has its own semi-parametric equalizer section and input level, along with individual filter controls to reduce feedback on stage. Channel-B also features a microphone input to allow any dynamic or condenser microphone to be used, including clip-on instrument mics or even vocal microphones. An FX Loop with a wet/dryknob provides the ability to blend in as much or as little pedal effects as desired, with a footswitch to bring them in and out of the signal chain at a moment's notice. Finally, once your tone is completely dialed-in, balanced XLR direct outs feed the PA system or a recording interface, with both Pre-EQ and Post-EQ outputs available. Technical Specifcations: * Two independent input channels with separate EQsMicrophone input on channel-B with 48V phantom powerEFX Loop and clean Boost with footswitch controlBalanced pre and post-EQ outputs to feed PA/MonitorsSwitch/Combine instruments with a clip-on or vocal micPZ Boost circuit to optimize for use with piezo transducersSelectable High-Pass/Notch filter to reduce on-stage feedbackReconfigure the EFX/Boost footswitch to suit your setup | Radial Engineering PZ-Pro 2-Channel Acoustic Instrumental Preamp
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering R15DC-UNIVERSAL 15VDC Switching Power Supply.
The Radial R15DC-UNIVERSAL switching power supply comes with multiple adaptors to connect to outlets in the USA, Europe, the United Kingdom, and Australia. This unit supplies 15V DC at 400mA with a center-pin positive barrel connection and can be used with any power grid where the mains voltage range is 100-240V, 50-60Hz. This switching power supply is designed for use with all 15V DC Radial products, except the legacy Tonebone tube-based guitar pedals and the JD7. | Radial Engineering R15DC-UNIVERSAL 15VDC Switching Power Supply
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering Shotgun 4-Channel Amp Driver.
"The Shotgun is a compact guitar-level signal buffer designed to drive up to four amplifiers simultaneously and fit nicely on any pedalboard. It features two inputs with a switching jack on input 2 that—when connected—changes the architecture from a 1x4 mono distribution system to a 2x2 stereo setup. The Shotgun is equipped with CLC—Radial's unique Consistent Load Compensation circuit—that retains a stable input impedance to ensure the character of the signal remains unchanged, no matter if you use one or two sources. Inside, a carefully designed low noise buffer circuit with a full-surface ground plane delivers your tone farther—up to 50' (15 meters) without noise. This is augmented with isolation transformers on outputs 2, 3 and 4 to help eliminate the nasty buzz and hum caused by ground loops when multiple amps are connected together. And like all Radial products, the Shotgun is made tough to handle the rigors of professional touring. Powering is done using standard 9V supply or multi-pedal power brick. When used in the 1x4 mono-mode, the Shotgun will effortlessly drive multiple amplifiers, direct box outputs and modeling amplifiers at the same time. In 2x2 stereo-mode, you can connect the output from your stereo chorus to the Shotgun and drive two or four amps in stereo, in phase, without noise. Inputs: Two 1/4""Outputs: Four 1/4""Configurable for 1x4 mono or 2x2 stereoIsolated outputs eliminate ground loopsBuffered outputs drive extra-long cablesCLC (Consistent Load Compensation circuit)Made in Canada | Radial Engineering Shotgun 4-Channel Amp Driver"
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering Switchbone V2 ABY/C Amp Selector and Booster Pedal.
The Switchbone V2 is an ABY/C guitar amp switcher that lets you switch and combine up to three guitar amplifiers without introducing distortion, switching noise or hum into the signal path. Most importantly, the Switchbone V2 will retain the natural tone and feel of your instrument so your playing style shines through. Unlike other switchers that employ integrated circuits to buffer the signal, the Switchbone features Radial's award winning Class-A audio circuit with 100% discrete components throughout. Class-A circuits are preferred by audiophiles and guitarists due to the purity of the signal path and warm sounding even-order harmonics that they produce. This is augmented with Drag™ control load correction that lets you dial-in the tone and feel as if connected directly to your amp. This clever combination lowers the impedance to allow runs of up to 15 meters (50') without susceptibility to noise using standard coaxial cables. To eliminate troublesome switching pops caused by mechanical footswitches and relays, the Switchbone employs high performance opto-couplers that essentially use light to emit and receive the command. These devices ramp-up and ramp-down the signal for smooth, controlled switching even with high gain amps. To eliminate the hum and buzz that is common with other switchers, the Switchbone V2 is equipped with transformer isolated outputs to eliminate nasty ground loops and is augmented with ground lift switches to further aid in noise elimination. Polarity reverse switches on outputs B and C ensure all amps are aligned to absolute phase. The Switchbone V2 may be used as a standard ABY switcher with both A and B outputs used separately or together. When two amps are on, ToggleMode™ LED indicators flash to let you know which amp was selected last so that you can either turn that one off or change the selection on the fly. When three amps are needed, the tuner output can be repurposed along with the third footswitch for clean rhythm and lead setups. In play, the Switchbone V2 elevates your setup with a variable Baseline™ buffer control that lets you juice up the front end of your amp for extra punch. A built-in power booster at the output delivers up to +18db of ultra-clean boost with the option to add mid-boost for extra sustain when playing lead. The Boost footswitch may also be reassigned to a tuner output for quiet on stage adjustments. To add even more control to your performance, the Slingshot™ remote control output can be used to turn on effects, change speakers when combined with the Tonebone™ Cabbone™ or even reroute effects using the Twinline™. 100% discrete Class-A signal path for exceptional audioDrag™ control load correction for natural toneOpto-coupler for noiseless switchingTransformer isolated to eliminate buzz and hum | Radial Engineering Switchbone V2 ABY/C Amp Selector and Booster Pedal
Store: Guitar Center - Get my Guitar found the latest prices on the Radial Engineering Switchbone V2 ABY/C Switcher.
The Switchbone features Radial's award winning Class-A audio circuit with 100% discrete components throughout. Class-A circuits are preferred by audiophiles and guitarists due to the purity of the signal path and warm sounding even-order harmonics that they produce. This is augmented with Drag control load correction that lets you 'dial-in' the tone and feel as if connected directly to your amp.
Store: zZounds - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering Tonebone PZ-Pre Acoustic Direct Box Preamp.
"The Tonebone PZ-Pre Acoustic DI Box Preamp is equipped with piezo acoustic input signal boosters to allow both add-on instrument pickups and built-in, integral active preamps to be combined for a more natural rendering. It is compact yet fullfeatured, designed for both studio and live performance. The Tonebone PZ-Pre instrument preamp begins with two inputs for two instruments, which can be toggled using the toggle footswitch. If you want to use two pickups on a single guitar, a unique Mix function is provided that converts the two channels from ""either-or"" to both. There are separate level controls for each input. The tone shaping on the PZ-Pre preamplifier is simple yet extremely musical. It features powerful bass and high controls with a semi-parametric mid. This is supported with a feedback eliminating notch filter with variable frequency sweep control and choice of normal and extra deep notch filtering. To help eliminate troublesome resonance, a dual slope low cut (high pass filter) is also provided. An internal polarity reverse can also be engaged to help eliminate run-away feedback. To augment on-stage performance, the PZ-Pre Direct Box Preamp is equipped with a combination power booster and effects loop bus. This allows you to introduce an effect such as a chorus, or boost the signal for soloing with a simple foot stomp. A separate tuner out has also been provided along with a mute footswitch for on-the-fly tuning. To facilitate all kinds of monitoring, the Radial PZ-Pre offers the most comprehensive output array ever: A standard instrument amp output sends the instrument signal to your personal amplifier. A pre-EQ balanced lo-Z balanced output is used to route the flat, pre-equalized signal the signal to the front of house mix position, while a second XLR out is post-EQ for onstage monitoring and in-ear systems so that the musician can get the sound he wants. XLR outputs are equipped with polarity reverse and ground lift. Like all Radial products, the PZ-Pre features heavy-duty 14-gauge construction and is supported with a 3-year transferable warranty. Comes equipped with an external 15VDC power supply. Piezo acoustic input signal boostersDesigned for studio and live performanceUnique Mix function1 -gauge construction3-year transferable warranty | Radial Engineering Tonebone PZ-Pre Acoustic Direct Box Preamp"
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering Tonebone Twin-City Active ABY Switcher.
The Bones Twin-City footswitch from Radial Engineering is an active ABY switcher and buffer that enables you to connect any two amps and drive them simultaneously without noise, loss of gain, and without degrading your natural guitar tone. This is accomplished with Radial's highly acclaimed buffering technology and the same Drag Control load correction circuitry as used in the award-winning Radial JD7 Injector. The 'set and' forget Drag Control lets you compensate for cable signal loss and introduce the perfect amount of loading to replicate the way your guitar and amp interact. To eliminate hum and buzz from ground loops, the Twin-City is equipped with an isolation transformer on output B. This is augmented with a ground lift switch and 180 polarity reverse switch that ensures both amplifiers play in phase while noise is reduced to an absolute minimum even when using older vintage amps that are generally more prone to noise. As a buffer, the Twin-City footswitch lowers the impedance and susceptibility to noise, making it the ideal signal driver for large stages when using long cable runs. Like all Radial products, the Bones are constructed from heavy 14 gauge steel for greater durability and added 'stay put' when kicked around on a busy stage. For even greater durability, the Twin-City footswitch employs Radial's own EIS-Electronic Impulse Switching-for outstanding performance without the challenges of mechanical switches. Bright, easy to see LEDs deliver on-stage switching cues so you know exactly where you are at all times. As most players employ pedal boards, the Radial Twin-City features standard 'Boss style' 9V powering that will adapt to most multi-pedal power supplies. The ultra compact design with top mounted output and DC connections allow effect pedals to be placed close together for those wishing maximum pedal board density. Buffered ABY with Drag load correctionIsolated output eliminates hum and buzz180 polarity sets both amps in phaseCompact to fit on any pedal boardStandard 9 volt power supply operation | Radial Engineering Tonebone Twin-City Active ABY Switcher
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Engineering Voco-Loco Vocal Preamp and Effect Switcher.
"The Voco-Loco is a foot-controlled effects loop that enables the lead vocalist, sax or trumpet player to incorporate guitar effects pedals into the signal path, just like an electric guitarist adds effects for soloing. The design begins with a state-of-the-art mic preamp that is designed to accept both a standard dynamic microphone or a condenser by activating the built-in phantom power supply. A great sounding two band EQ with low and high frequency shelving makes it easy to add warmth and shimmer. The signal is then sent to the guitar pedals via a transformer isolated hi-Z effects loop circuit that is equipped with individual send & receive controls to optimize signal-to-noise and reduce distortion. A tone control on the return path lets you smooth the sound of pedals that may be overly bright and the blend control lets you mix the original 'dry' signal with the 'wet' effect to set the perfect mix. Simply plug your mic into the Voco-Loco via the XLR input, connect your effects pedals using standard ¼"" guitar cables, and then send the output from the Voco-Loco to the input on your mixer. Before the song begins, choose which effects you want on and - when you are ready - activate the loop using the right hand footswitch. A second footswitch serves double-duty as either a mute switch to turn off the mic between sets or as a 100% wet effects loop for special situations where you may not want any of the clean signal to pass through. With the Voco-Loco in your signal chain, you can add delay or reverb, maybe a touch of distortion or even a special effect like a wah-wah to enhance your solo performance. The options are only limited by your imagination and desire to stand out from the crowd! Add guitar effects pedals to vocals or instrumentsCreate exciting and unique effects as you performTurn on multiple effects using one footswitchWorks with either dynamic or condenser microphones | Radial Engineering Voco-Loco Vocal Preamp and Effect Switcher"
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Radial Highline Passive Mono Line Isolator.
Amp simulators are more popular than ever, but they present a unique set of problems for guitar and bass players who want to interface them with a PA system. While amp sims can produce line-level outputs, they often have 1/4" unbalanced connectors that aren't designed for long cable runs, and they encounter hum and buzz from ground loops when connected directly to the PA.
Store: zZounds - Deal found on the: website.
Get my Guitar found the latest prices on the Radial IceCube IC-1 Passive Line Level Isolator.
The Radial IceCube IC-1 is a balanced line level isolator designed to quickly eliminate hum and buzz problems in an audio system by simply inserting it into the signal path. Measuring just over 4" x 1" (10 x 4cm), the compact design begins with two super-duty glass-filled nylon XLRs at each end with heavy duty nickel-silver contacts that will not tarnish over time.
Store: zZounds - Get my Guitar found the latest prices on the Radial JX42 V2 Four Instrument Dual Amp Switch.
Incredible audio quality and remote connectivity, the JX42 V2 offers professional guitar and amp switching for any touring act. The Radial JX42 V2 is a four-instrument, two-amp switching device designed to streamline any stage setup to ensure professional changeovers and zero downtime should problems arise.
Store: zZounds - Get my Guitar found the latest prices on the Radial JX44 V2 Guitar And Amp Switching System.
The Radial JX44 V2 is a guitar & amp switching and routing system for professional concert touring, providing you with the ability to connect and manage up to four guitars & four amplifiers, a stereo effects chain and a remote pedalboard with seamless integration throughout.
Store: zZounds - Get my Guitar found the latest prices on the Radial PSU15VDC 15V AC Adaptor For Radial Products.
This Radial replacement 15V Switching power supply is designed for use with 15V Radial products and comes with multiple adaptors to connect to outlets in the USA, Europe, the United Kingdom, and Australia. This unit supplies 15V at 400mA with a center-pin positive barrel connector and can be used with any power grid where the mains voltage range is 100-240V, 50-60Hz.
Store: zZounds - Get my Guitar found the latest prices on the Radial Pz-Pro Dual Channel Acoustic Preamp.
The Radial PZ-Pro is designed for instrumentalists and performers who take a no-compromise approach when it comes to tone, both on stage and in the recording studio. Dual input channels allow you to switch between or blend together two sources, with full control over the sound of each input.
Store: zZounds - Get my Guitar found the latest prices on the Radial PZDI Active DI for Acoustic Instruments.
The Radial PZ-DI has a variable load selector switch that allows you to set the input impedance of the direct box, so you can optimize the performance with your instrument's pickups.
Store: zZounds - Get my Guitar found the latest prices on the Radial Tonebone Headbone VT Amp Head Switcher.
With the Headbone in your rig, you can access your choice of amplifier with a single footswitch, giving you the ability to easily select between one amplifier for rhythm and another one for solos. To eliminate long cables running across the stage, you can switch the Headbone remotely with a Slingshot input that allows you to connect any standard footswitch or MIDI controlled contact closure, further streamlining your setup on stage.
Store: zZounds - Get my Guitar found the latest prices on the Radial ToneBone PZ Pre Acoustic Instrument Preamp.
The Radial PZ-Pre is a powerful acoustic instrument preamplifier. The magic lies in the combination of high performance 100% discrete class-A PZB piezo boosters, an ultra-quiet preamp circuit that will adapt to any pickup system and a host of connectivity options that will put you in total control.
Store: zZounds - Get my Guitar found the latest prices on the Radial Twin City Bones A-B-Y Selector Box.
The Twin-City is an active ABY switcher and buffer that enables you to connect any two amps and drive them simultaneously without noise, loss of gain and without degrading your natural guitar tone. This is accomplished with Radial's highly acclaimed buffering technology and the same Drag Control (TM) load correction circuitry as used in the award-winning Radial JD7 Injector. The 'set and forget' Drag Control lets you compensate for cable signal loss and introduce the perfect amount of loading to replicate the way your guitar and amp interact.
Store: zZounds - Deal found on the: website.
Get my Guitar found the latest prices on the Randall RD412-V30 Diavlo 4x12 Guitar Cab Black.
"The Randall RD412-V30 Diavlo speaker cabinet features four of the legendary Celestion Vintage 30 12"" speakers, together rated at 260W, made to pair with the Diavlo series metal-geared heads and combos. While the ruggedly constructed cabinet box is square, the speakers are mounted on an angled baffle to help project your sound and highlight more high frequencies. Power: 260WSpeaker: 4x12"" Celestion Vintage 30Impedance: 8 ohm parallel mono/16 ohm stereoHeavy-duty metal speaker grilleCasters includedDimensions: 30"" x 14.1"" x 30""Weight: 95 lb. | Randall RD412-V30 Diavlo 4x12 Guitar Cab Black"
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Randall RD45H Diavlo 45W Tube Guitar Head Black.
"The Randall RD45H 45W amp head provides the spine-crushing, tube-driven tone, but in a size you can use for practice, the studio or the stage. It features two footswitchable channels (Clean and Overdrive) with a volume boost, and shared four-band EQ and master volume. Each channel has independent gain controls, and the Overdrive channel has an independent Volume control. Around the back of the ruggedly constructed head are dual speaker outputs, speaker-emulated XLR output for direct recording or feeding directly to a house PA, an FX loop and the tone complement of two 6L6 power tubes and four 12AX7 preamp tubes. Power: 45W tubeTwo footswitchable channels (Clean and Overdrive), plus boostFootswitch includedSpeaker-emulated XLR outputFX loopDimensions: 19.7"" x 8.6"" x 10""Weight: 30.8 lbs. | Randall RD45H Diavlo 45W Tube Guitar Head Black"
Store: Guitar Center Randall RX412 Cabinet Black
$679.99Deal found on the: website.
Get my Guitar found the latest prices on the Randall RX412 Cabinet Black.
"Randall's RX412 cabinet delivers huge sound that rivals the tone and power of much larger, more expensive boxes. Much of its power comes from the 4 - 12"" Randall Jaguar speakers, but throw in the RX tone circuits and it delivers plenty of tight lows and enough top end sizzle to satisfy any metal monster. 200W cabinet4 - 12"" Randall Jaguar speakersBlack cloth grillePlywood construction8 ohm mono input | Randall RX412 Cabinet Black"
Store: Guitar Center- Deal found on the: website.
Get my Guitar found the latest prices on the Randall Thrasher 120W 4-Mode All-Tube Amplifier Head.
"Randall's Thrasher is a 2-channel, four mode, 120W all-tube head and features Active/Passive inputs, High and Low Frequency Gain controls, full EQ for both channels, Presence/Density power amp voicing, Push/Pull bias controls, and Series/Parallel Loop. To protect it during transport, the Thrasher has been outfitted with heavy-duty metal front/rear grilles, corners, and edging while dual top handles make it easier to lift. A 2-button LED footswitch is included. Wattage/Power: 120 wattsChannels: 2+ boostSpeaker: n/aImpedance: 16, 8, 4? MinimumFX/GATE/REVERB: Tube Series/Parallel LoopFootswitch: Two channels and boost mode (RF2-LED)Dimensions (LxWxH): 29"" (738mm) x 10.4"" (265mm) x 10.5"" (266mm)Weight: 60 lb. (27kg) | Randall Thrasher 120W 4-Mode All-Tube Amplifier Head"
Store: Guitar Center - Deal found on the: website.
Get my Guitar found the latest prices on the Randall Thrasher 50W Tube Guitar Amp Head.
Engineered by world renowned amp guru, Mike Fortin, this amplifier is the result of countless hours of listening tweaking and perfecting the tight and relentless attack that the circuit delivers. The design is intended to offer a more focused approach to tube amp performance than previously available in the market. Drop tuning, 6-, 7- , 8- and higher stringed instruments will translate with pristine clarity while still maintaining over the top gain and playability regardless of the setting. 2 channel4 model50-watt tube (4-12AX7/2-6L6) head with High & Low Frequency Gain controlsFull EQ on Channel 1Tone control for clean channelGlobal tube boostPresence/Depth power amp voicing Class A Discrete instrument level loopHeavy-duty metal front rear grilles, cornersFootswitch included | Randall Thrasher 50W Tube Guitar Amp Head
Store: Guitar Center
Welcome to the Get My Guitar Shop: Your Ultimate Guitar & Gear Search Engine!
Hey there, gear hunters and tone seekers! 🤘 You’ve just stepped into the Get My Guitar Shop—the ultimate search engine for guitarists. We’re not your average music store. Instead, we do the heavy lifting by scouring the web to bring you the best guitars, gear, and deals—all in one convenient place!
Think of us as your personal guitar shopper, delivering top deals and gear from the biggest and most trusted online retailers. No more bouncing between tabs or hunting for sales—we’ve got it all here for you.
🎸 What You’ll Find in the Get My Guitar Shop:
- Guitars for Every Style & Budget: From legendary classics to budget-friendly gems, we collect the best online deals on electric, acoustic, and bass guitars.
- Amplifiers & Pedals: Whether you need a bedroom practice amp or gig-ready power, or you’re hunting for that perfect pedal to shape your sound—we’ve got you covered.
- Accessories Made Easy: Strings, straps, picks, and more—all from the most reliable brands at the best prices.
- Latest Deals & Sales: We track sales and promotions from leading retailers, so you never miss out on a great bargain.
⚡ Why Guitarists Love Shopping with Us:
- All-in-One Convenience: Skip the search. We pull the best guitars and gear from top sites and put them in one place.
- Trusted Retailers: We partner with major online stores like Guitar Center, Sweetwater, Reverb, and more to ensure you shop securely.
- Save Time & Money: Compare prices and score deals without opening a dozen tabs.
- Affiliate Supported: Clicking our links helps keep our site running—at no extra cost to you!
💥 Need Help Finding the Perfect Gear?
Looking for the best Telecaster deal? Need to compare amp prices? We’re here to help you discover gear that fits your sound and budget. Just search, compare, and play.
Start your gear journey now and let us help you find your next favorite guitar or piece of gear!
👉 Start Searching for Deals and crank up the volume on your guitar journey! 🎶
